不同盐度对文蛤(Meretrix meretrix)呼吸代谢及体内酶活性的影响

为研究不同盐度对文蛤呼吸代谢的影响,本实验设置5个盐度(‰)梯度(11、18、25、32、39),检测不同盐度对文蛤(Meretrixmeretrix)耗氧和排氨的影响,以及文蛤的外套膜、鳃、肝胰腺三种组织中乳酸脱氢酶和Na+/K+-ATP酶活性的变化。结果表明:随着盐度的不断升高,文蛤耗氧率先升后降再升,在盐度18时达到最大值;排氨率先升后降,在盐度32时达到最大值。随着盐度不断升高和胁迫时间延长,文蛤的肝胰腺中乳酸脱氢酶活力总体呈先升高后下降再升高的趋势(P0.05),酶活力在盐度39时为最高;随着盐度不断升高和胁迫时间延长,文蛤的外套膜中Na+/K+-ATP酶活力总体呈先下降再升高后下降的趋势(P0.05),在盐度32时为最高;文蛤的外套膜和鳃中乳酸脱氢酶活力以及鳃和肝胰腺中Na+/K+-ATP酶活力受盐度影响不显著(P0.05),酶活力变化也多呈现"W"形的变化趋势。研究结果为文蛤的人工养殖提供参考。     

光照、温度对黑鲷(♀)×真鲷(♂)杂交子代受精卵孵化效果的影响

为了研究不同光照强度、温度对黑鲷(Acantho pagrusschlegelii)(♀)×真鲷(Pagrosomus major)(♂)杂交F1代受精卵孵化效果及仔鱼存活的影响,作者采用试验生态学的方法比较不同温度(16、18、20、22、24、26℃)下杂交鲷受精卵的孵化率、畸形率、孵化时间、7日龄仔鱼的存活率;比较不同光照强度下(10、100、300、800、1500、4 000、10 000 lx)受精卵孵化率、畸形率、孵化时间;比较不同光照强度下(200、1 000、2 000、5 000、10 000、15 000、20 000 lx)7日龄仔鱼的存活率。结果表明:在盐度为22条件下,受精卵最高孵化率(34.00%)和最低畸形率(16.65%)的孵化温度为20℃;在16～26℃范围内,温度与孵化时间呈负相关,与7日龄仔鱼存活率也呈负相关。不同的光照强度对受精卵孵化率和孵化时间的影响不显著,孵化率为65.88%～71.88%;但大于800lx的光照会令畸形率上升(大于15.21%);另外,5000～10000lx的光照强度更适宜仔鱼生存,7日龄仔鱼存活率达到38%～40.75%。黑鲷(♀)×真鲷(♂)杂交子代最佳孵化温度为20℃,最适光照强度为5 000～10 000 lx。     

复杂地形景区三维导览图的设计与实现

为满足复杂地形景区对三维地图导览的需求,构建更为清晰的三维地图模型,提供良好的三维导览地图设计方案显得尤为重要。为了更好地与卫星影像进行贴合,DEM数据的采样密度要与卫星影像的分辨率一致。本文通过对比当下常用的四种空间插值方法的适用范围与运用特点,设置相关阈值及权重,直观比较了四种插值方法产生的插值结果,选择更适合复杂景区DEM插值的插值方法并对其进行精度提升,以此得到符合精度要求的DEM数据。最后利用相应地区的卫星影像进行地图投影及影像贴图,两种数据结合构建复杂景区的三维地图模型,给游客带来更为精确直观的定位信息和空间要素信息。     

连续台风时期香港区域的水汽变化分析

利用香港卫星定位参考站网GNSS观测数据,提取强热带风暴"塔拉斯"与热带风暴"洛克"影响期间各测站天顶方向对流层延迟,反演香港区域大气可降水量;根据香港区域49个天文台气象站提供的实测降雨量数据,分析大气可降水量与实际降雨量的相关性,以及两次台风对香港区域水汽时空分布的不同影响。结果表明,大气可降水量在台风影响前期均上升,在大量降雨后回落,但在连续台风的间歇期间,仍高于台风来临前的水平;水汽累积是大量降雨的前提条件,当水汽累积量相近时,水汽累积时长与累积降雨量呈正相关;台风期间大气可降水量值超过65 mm的区域面积与台风等级相关,台风路径对局部水汽分布有一定的影响。     

Local level rainfall and temperature variability in drought-prone districts of rural Sidama,central rift valley region of Ethiopia

ABSTRACT

The purpose of this study is to examine local level spatiotemporal rainfall and temperature variability in drought-prone districts of rural Sidama, Central Rift Valley region of Ethiopia. The study used 129 gridded monthly rainfall and temperature data of 32 years (1983–2014). The gridded rainfall and temperature records were encoded into GIS software and evaluated through different statistical and geospatial techniques. Mann-Kendal rank test and F distribution tests were used to test temporal and spatial statistical significance, respectively, of the data. The analysis revealed that Belg and Kiremt are the main rainfall seasons, constituting 81% of the annual rainfall. Although annual, Kiremt, and Belg rainfall amounts appear to have decreased over time, the decreasing trend is statistically significant only for Belg rainfall records. On the other hand, rainfall standard anomaly results indicated seven droughts of different magnitudes: one extreme, two severe, and four moderate. The study also revealed increasing temperature trends over the years under consideration that are statistically significant. The findings of this study on rainfall contradict other findings obtained around the study area. Thus, climate change adaptations need to focus on location-specific climate data analysis so that the intended adaptive interventions can be successful.     

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.     

Wetland hydroperiod classification in the western prairies using multitemporal synthetic aperture radar

Wetlands represent one of the world's most biodiverse and threatened ecosystem types and were diminished globally by about two‐thirds in the 20th century. There is continuing decline in wetland quantity and function due to infilling and other human activities. In addition, with climate change, warmer temperatures and changes in precipitation and evapotranspiration are reducing wetland surface and groundwater supplies, further altering wetland hydrology and vegetation. There is a need to automate inventory and monitoring of wetlands, and as a study system, we investigated the Shepard Slough wetlands complex, which includes numerous wetlands in urban, suburban, and agricultural zones in the prairie pothole region of southern Alberta, Canada. Here, wetlands are generally confined to depressions in the undulating terrain, challenging wetlands inventory and monitoring. This study applied threshold and frequency analysis routines for high‐resolution, single‐polarization (HH) RADARSAT‐2, synthetic aperture radar mapping. This enabled a growing season surface water extent hyroperiod‐based wetland classification, which can support water and wetland resource monitoring. This 3‐year study demonstrated synthetic aperture radar‐derived multitemporal open‐water masks provided an effective index of wetland permanence class, with overall accuracies of 89% to 95% compared with optical validation data, and RMSE between 0.2 and 0.7 m between model and field validation data. This allowed for characterizing the distribution and dynamics of 4 marsh wetlands hydroperiod classes, temporary, seasonal, semipermanent, and permanent, and mapping of the sequential vegetation bands that included emergent, obligate wetland, facultative wetland, and upland plant communities. Hydroperiod variation and surface water extent were found to be influenced by short‐term rainfall events in both wet and dry years. Seasonal hydroperiods in wetlands were particularly variable if there was a decrease in the temporary or semipermanent hydroperiod classes. In years with extreme rain events, the temporary wetlands especially increased relative to longer lasting wetlands (84% in 2015 with significant rainfall events, compared with 42% otherwise).     

Revisiting the existence of an effective stress for wet granular soils with micromechanics

A possible effective stress variable for wet granular materials is numerically investigated based on an adapted discrete element method (DEM) model for an ideal three‐phase system. The DEM simulations consider granular materials made of nearly monodisperse spherical particles, in the pendular regime with the pore fluid mixture consisting of distinct water menisci bridging particle pairs. The contact force‐related stress contribution to the total stresses is isolated and tested as the effective stress candidate for dense or loose systems. It is first recalled that this contact stress tensor is indeed an adequate effective stress that describes stress limit states of wet samples with the same Mohr‐Coulomb criterion associated with their dry counterparts. As for constitutive relationships, it is demonstrated that the contact stress tensor used in conjunction with dry constitutive relations does describe the strains of wet samples during an initial strain regime but not beyond. Outside this so‐called quasi‐static strain regime, whose extent is much greater for dense than loose materials, dramatic changes in the contact network prevent macroscale contact stress‐strain relationships to apply in the same manner to dry and unsaturated conditions. The presented numerical results also reveal unexpected constitutive bifurcations for the loose material, related to stick‐slip macrobehavior.     

非等间距GM(1,1)模型的总体最小二乘算法及其病态问题

在非等间距GM(1,1)模型中，系数矩阵中有无误差的常数项和有误差的随机项，并且系数矩阵与观测向量误差同源，即系数矩阵与观测向量中有相同的元素存在，这些相同元素应该有相同的改正数，为此本文推导了一种适合非等间距GM(1,1)模型求解的总体最小二乘算法。同时，考虑到非等间距GM(1,1)模型中存在病态问题时影响总体最小二乘计算结果的稳定性，提出对系数矩阵常数列乘以某一常数的方法，以改善病态问题。